FOAM-A-COIL
Condenser and Evaporator Coil Cleaner

Description | Characteristics | Applications | Packaging | Instructions | Precautions | Specifications |
Limited Warranty

DESCRIPTION:


Foam-A-Coil is a non-acid high foaming cleaner for condenser coils, evaporator coils, mechanical equipment and air filters. Foam-A-Coil penetrating, surfactant aided, foaming action lifts and removes grime, oil, grease and dust from air conditioning, refrigeration coils, air handling and mechanical equipment. Foam-A-Coil requires no special ventilation and is biodegradable.

Top of Page

CHARACTERISTICS:


  • Foaming action penetrates stubborn grease, tars and dirt. It disperses them so they can be rinsed away with water.
  • Biodegradable
  • Non-Acid, can be use indoors and outdoors
  • Will not harm copper or aluminum
  • Concentrated - dilute with water for economical use.
  •  

    Top of Page

    APPLICATIONS:


    Foam-A-Coil can be safely used on aluminum, copper, stainless steel or washable painted surfaces. It is formulated to clean metal coils, fibers and metal mesh filters, and other metal surfaces where acids cannot be used.

    For industrial use only by trained professional personnel.

    Top of Page

    PACKAGING:


    Code Size Qty. Per Case Lbs. per Case Cu. Ft Per Case
    82632 Gallon (3.8 L) 4 bottles 36 1.21

    82634

    5 Gallons (18.9 L)

    1 pail

    45

    1.10

    82638

    55 Gallons (208 L)

    1 drum

    535

    9.01

    82640

    12 oz. Aerosol

    12 cans

    13

    0.51

    Top of Page

    INSTRUCTIONS:


    READ ALL DIRECTION AND WARNINGS ON LABEL BEFORE USING

    CONCENTRATE

    1. Appropriate dilution with water is the key to effective and economic use.

    For extremely dirty coils and equipment: dilute with 4 to 5 parts of water.

    For a Continuous Maintenance Program: dilute with 6 to 10 parts of water.

    2. Shake or mix before use.

    3. Apply the diluted solution with the Stewart Hall Penetrator Sprayer(TM) or other sprayer for small to medium jobs. Use a brush to help faster penetration for especially hard or encrusted dirt.

    4. Allow 5 to 10 minutes of soaking time.

    5. On evaporator coil, rinsing is not required, provided system is operating.

    AEROSOL

    1. Shake well before using.

    2. Spray area thoroughly and allow to soak for several minutes.

    3. Wipe clean or flush with water.

    SPECIAL NOTE: On waxed and painted coils, Foam-A-Coil should be rinsed off within a minute of application to avoid the possibility of removing wax or fading the paint.

    For additional technical information, call Toll Free 1-800-231-3345.

    Top of Page

    PRECAUTIONS:


    FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT,

    CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300

    CONTAINS: Organic cleaners and inorganic disperants. PRECAUTIONS: Avoid contact with skin and eyes. Use protective eye wear and protective gloves. Do not take internally. FIRST AID: For any overexposure, get immediate medical attention after first aid is given. Eyes and Skin - Flush with large amounts of clean water for at least 15 minutes. Inhalation - Remove to fresh air. Give oxygen or artificial if needed. Ingestion - INDUCE VOMITING. Only if conscious, give large amounts of water, then milk of magnesia. If unconscious, do not give anything by mouth or attempt to induce vomiting. Call a physician immediately. FIRE AND SPILLS: For fire, use water fog, CO2, foam or dry chemicals to extinguish. For spills, shut off ignition sources, ventilate confined areas and wipe up with absorbent materials to prevent footing hazard. STORAGE AND HANDLING: Store in cool place away from all food. Keep container upright and tightly closed when not in use. Do not reuse empty container. KEEP OUT OF REACH OF CHILDREN.

    For additional information, refer to Material Safety Data Sheet.

    Top of Page

    SPECIFICATIONS:


    Wt/Gal @ 77 degree F 8.5+-0.5 lbs/gal.
    Flash Point SETA CC None
    Color Bright yellow/ Green
    Shelf Life 2 years

    Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.

    Top of Page

    LIMITED WARRANTY:


    RectorSeal® makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL®. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed, and RectorSeal® shall not be liable for incidental or consequential damages.

    Top of Page

    MANUFACTURED IN U.S.A. BY

    RectorSeal®
    2601 Spenwick Drive • Houston, TX 77055 USA
    713-263-8001 • Fax 713-263-7577
    Toll-free 800-231-3345 • Fax 800-441-0051

    Back