Pipe Thread Sealant with PTFE

Description | Characteristics | Applications | Packaging | Instructions | Precautions | Specifications |
Limited Warranty


RectorSeal® T Plus® is a non-hardening thread sealant containing PTFE plus synthetic fibers. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal® T Plus 2® is non-toxic in accordance with NSF Standard 61. In addition, it is approved and listed with the Canadian Standards Association (CSA).
Top of Page


  • PTFE enriched
  • Non-staining and non-separating
  • Allows immediate pressurization
  • Lubricates and protects threads
  • For use with potable water (hot or cold)
  • Low odor
  • Non-setting and will not dry out in the can
  • Lead free and contains no other metals
  • Formulated for plastic and metal pipe
  • For pressures up to 10,000 psi (liquids) and 2,000 psi (gases)
  • Smooth easy application
  • Multipurpose
  • Non-flammable

    Top of Page


    RectorSeal® T Plus 2®can be used on a variety of metal and plastic piping including iron, galvanized steel, stainless steel, brass, copper, aluminum, polyethylene, reinforced fiberglass, PVC, ABS and CPVC including FlowGuard Gold®**.

    RectorSeal® T Plus 2® is recommended for pipe carrying:

    Acids, Dilute Heating Oils Natural Gas
    Air, Compressed Helium, Gaseous Nitrogen, Gaseous
    Ammonia- Gaseous, Liquid Hydraulic Oils Soap, Liquid
    Aliphatic Solvents Hydrogen, Gaseous Vegetable Oils
    Caustic, Dilute Inert Gases, Gaseous Water (Hot or Cold)
    Cutting Oils (Low Aromatic) Kerosene  
    Refrigerants Liquified Petroleum Gases (Butane, Propane, Mixtures)
    Mineral Oils  

    Not recommended for oxygen.

    Top of Page


    Code Size Qty. Per Case Lbs. per Case Cu. Ft Per Case
    23710 1 3/4 oz. display (50 g) 24 tubes 4 .13
    23720 1 3/4 oz. bulk (50 g) 48 tubes 6 .23
    23631 1/4 pint brush top (118 ml) 24 cans 12 .18
    23551 1/2 pint brush top (237 ml) 24 cans 21 .45
    23431 Pint brush top (473 ml) 12 cans 19 .43
    23391 Quart brush top (946 ml) 12 cans 34 .78
    23271 Gallon friction top (3.8 L) 4 cans 45 .94
    23191 5 Gallon (18.9 L) 1 pail 58 1.12
    23112 55 Gallon (208 L) 1 drum 638 9.01

    Top of Page


    1. Stir before using.

    2. Wipe threads clean.

    3. For pipe diameters up to 1 1/4", apply to male threads only. For larger sizes, apply to both male and female threads.

    4. Join pipe per ANSI Standards.  Piping may be placed into service immediately.

    For additional technical information, call Toll Free 1-800-231-3345.

    Top of Page


    CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300

    PRECAUTIONS: Do not take internally. Do not burn - fumes may be harmful. Wash after handling. FIRST AID: For any overexposure, get immediate medical attention after first aid is given. Eyes - Flush 15 minutes with clean water. Skin - Wash with soap and water. Inhalation for burning fumes - Remove to fresh air. Ingestion - Only if conscious, give large amounts of water and INDUCE VOMITING. Obtain medical attention. FIRE AND SPILLS: For fire, use water fog, CO2, foam, or dry chemicals. Wipe up spills to prevent footing hazard. STORAGE AND HANDLING: Keep container closed when not in use. Do not reuse empty container. KEEP OUT OF REACH OF CHILDREN.

    For additional information, refer to Material Safety Data Sheet.

    Top of Page


    Wt/Gal @ 77 degree F 11.0 +- .5 lbs/gal.
    Flash Point SETA CC Greater than 300 degree F
    Non-volatiles 100%
    Color White
    Shelf Life 2 years minimum
    Federal Specification TT-S-1732


    FBC System Compatible* indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® pipe and fittings.
    FBC, FlowGuard Gold®, BlazeMaster® and Corzan® are licensed trademarks of the Lubrizol Corporation.

    "MeetsANSI LC 7-2009 Working Temperature Range -40F to 125F.
    Maximum Working Pressure: 125 psi.
    For Use With Natural Gas & LP (VAPOR STATE ONLY).
    Use on Steel, Galvanized Steel, Iron, Brass, Copper and Aluminum.
    For Pipe Size Up To And Including 1 1/4 Inch".

    Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.

    Top of Page


    RectorSeal® makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL®. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed, and RectorSeal® shall not be liable for incidental or consequential damages.

    Top of Page


    2601 Spenwick Drive • Houston, TX 77055 USA
    713-263-8001 • Fax 713-263-7577
    Toll-free 800-231-3345 • Fax 800-441-0051


    Back to Pipe Thread Sealants